Fire Evacuation Plan Requirements in Rhode Island
Who regulates evacuation plans in Rhode Island, which codes apply, and what your posted evacuation maps must include.
Who regulates evacuation plans in Rhode Island?
Workplaces in Rhode Island are covered by federal OSHA. Under 29 CFR 1910.38, an Emergency Action Plan is required whenever another OSHA standard calls for one — which covers many ordinary workplaces via rules on fire extinguishers, alarms and hazardous materials. The plan must include evacuation procedures, escape route assignments, and a method to account for every employee after an evacuation. Employers with more than 10 employees must keep it in writing; those with 10 or fewer may communicate it orally, though a posted evacuation map remains best practice.
Building and fire codes in Rhode Island
The Rhode Island Fire Safety Code incorporates NFPA 1 and NFPA 101 with state amendments.
Code editions and amendments change over time and can differ between cities and counties in Rhode Island. Always confirm the currently adopted editions and any evacuation-diagram requirements with your local fire marshal or Authority Having Jurisdiction (AHJ) before finalising your plan.
What your Rhode Island evacuation plan should include
Whatever your occupancy type, inspectors and insurers in Rhode Island expect evacuation maps that are accurate, current, and easy to read at a glance. A compliant plan typically shows:
- All exits, with primary and secondary evacuation routes from every area
- A “You Are Here” marker oriented to the viewer's position
- ISO 7010 / NFPA 170 safety symbols: extinguishers, alarm call points, first aid
- The designated outdoor assembly point
- Floor identification, revision date, and emergency contact details
Create a compliant Rhode Island evacuation plan in minutes
Upload your building's PDF floorplan to the free EvacPlan Generator editor, draw your routes, place ISO safety symbols, and export a print-ready evacuation map — no software to install and no design skills needed. You can also start from one of our free evacuation plan templates.
This page is a general guide, not legal advice. Code adoptions and amendments change — always verify current requirements with your local fire marshal or Authority Having Jurisdiction (AHJ) in Rhode Island.
Frequently asked questions
Are evacuation plans required by law in Rhode Island?
For many workplaces, yes. Federal OSHA's 29 CFR 1910.38 requires an Emergency Action Plan (including evacuation procedures) whenever another OSHA standard calls for one — and it must be in writing if you have more than 10 employees. Local fire codes in Rhode Island may additionally require posted evacuation diagrams for specific occupancies such as hotels, schools and assembly buildings.
Which fire code applies to my building in Rhode Island?
The Rhode Island Fire Safety Code incorporates NFPA 1 and NFPA 101 with state amendments. The definitive answer always comes from your local Authority Having Jurisdiction (AHJ) — usually the city or county fire marshal — who can confirm the adopted edition and any local amendments.
How do I make an evacuation map for my building in Rhode Island?
Upload a PDF floorplan to a tool like EvacPlan Generator, mark all exits, draw primary and secondary routes from each area, add ISO 7010 safety symbols and an assembly point, then print, laminate and post the maps at exits, lift lobbies and corridors. Review the plan whenever the layout changes and at least annually.