Fire Evacuation Plan Requirements in Arkansas
Who regulates evacuation plans in Arkansas, which codes apply, and what your posted evacuation maps must include.
Who regulates evacuation plans in Arkansas?
Workplaces in Arkansas are covered by federal OSHA. Under 29 CFR 1910.38, an Emergency Action Plan is required whenever another OSHA standard calls for one — which covers many ordinary workplaces via rules on fire extinguishers, alarms and hazardous materials. The plan must include evacuation procedures, escape route assignments, and a method to account for every employee after an evacuation. Employers with more than 10 employees must keep it in writing; those with 10 or fewer may communicate it orally, though a posted evacuation map remains best practice.
Building and fire codes in Arkansas
Like most US states, Arkansas bases its building and fire regulations on the International Code family (IBC/IFC), adopted with state or local amendments. Egress fundamentals — the number of exits, exit widths, travel distance limits, exit signage and emergency lighting — flow from these codes.
Code editions and amendments change over time and can differ between cities and counties in Arkansas. Always confirm the currently adopted editions and any evacuation-diagram requirements with your local fire marshal or Authority Having Jurisdiction (AHJ) before finalising your plan.
What your Arkansas evacuation plan should include
Whatever your occupancy type, inspectors and insurers in Arkansas expect evacuation maps that are accurate, current, and easy to read at a glance. A compliant plan typically shows:
- All exits, with primary and secondary evacuation routes from every area
- A “You Are Here” marker oriented to the viewer's position
- ISO 7010 / NFPA 170 safety symbols: extinguishers, alarm call points, first aid
- The designated outdoor assembly point
- Floor identification, revision date, and emergency contact details
Create a compliant Arkansas evacuation plan in minutes
Upload your building's PDF floorplan to the free EvacPlan Generator editor, draw your routes, place ISO safety symbols, and export a print-ready evacuation map — no software to install and no design skills needed. You can also start from one of our free evacuation plan templates.
This page is a general guide, not legal advice. Code adoptions and amendments change — always verify current requirements with your local fire marshal or Authority Having Jurisdiction (AHJ) in Arkansas.
Frequently asked questions
Are evacuation plans required by law in Arkansas?
For many workplaces, yes. Federal OSHA's 29 CFR 1910.38 requires an Emergency Action Plan (including evacuation procedures) whenever another OSHA standard calls for one — and it must be in writing if you have more than 10 employees. Local fire codes in Arkansas may additionally require posted evacuation diagrams for specific occupancies such as hotels, schools and assembly buildings.
Which fire code applies to my building in Arkansas?
Arkansas generally follows codes based on the International Code family, adopted with amendments. The definitive answer always comes from your local Authority Having Jurisdiction (AHJ) — usually the city or county fire marshal — who can confirm the adopted edition and any local amendments.
How do I make an evacuation map for my building in Arkansas?
Upload a PDF floorplan to a tool like EvacPlan Generator, mark all exits, draw primary and secondary routes from each area, add ISO 7010 safety symbols and an assembly point, then print, laminate and post the maps at exits, lift lobbies and corridors. Review the plan whenever the layout changes and at least annually.