Fire Evacuation Plan Requirements in Maryland
Who regulates evacuation plans in Maryland, which codes apply, and what your posted evacuation maps must include.
Who regulates evacuation plans in Maryland?
Maryland operates an OSHA-approved State Plan, meaning workplace safety rules for private employers are enforced by the state rather than federal OSHA. State Plans must be at least as effective as federal OSHA, so the federal Emergency Action Plan rule (29 CFR 1910.38) is the baseline: where another OSHA standard requires an Emergency Action Plan (common examples include fire extinguisher and hazardous-materials rules), the plan must cover evacuation procedures, escape route assignments, and a way to account for all employees after evacuation. Employers with more than 10 employees must keep the plan in writing; smaller employers may communicate it orally.
In practice this means Maryland employers should maintain a written Emergency Action Plan, post evacuation maps at decision points, and train employees on their routes and assembly point — with any additional state-specific requirements layered on top.
Building and fire codes in Maryland
Maryland's State Fire Prevention Code incorporates NFPA 1 and NFPA 101.
Code editions and amendments change over time and can differ between cities and counties in Maryland. Always confirm the currently adopted editions and any evacuation-diagram requirements with your local fire marshal or Authority Having Jurisdiction (AHJ) before finalising your plan.
What your Maryland evacuation plan should include
Whatever your occupancy type, inspectors and insurers in Maryland expect evacuation maps that are accurate, current, and easy to read at a glance. A compliant plan typically shows:
- All exits, with primary and secondary evacuation routes from every area
- A “You Are Here” marker oriented to the viewer's position
- ISO 7010 / NFPA 170 safety symbols: extinguishers, alarm call points, first aid
- The designated outdoor assembly point
- Floor identification, revision date, and emergency contact details
Create a compliant Maryland evacuation plan in minutes
Upload your building's PDF floorplan to the free EvacPlan Generator editor, draw your routes, place ISO safety symbols, and export a print-ready evacuation map — no software to install and no design skills needed. You can also start from one of our free evacuation plan templates.
This page is a general guide, not legal advice. Code adoptions and amendments change — always verify current requirements with your local fire marshal or Authority Having Jurisdiction (AHJ) in Maryland.
Frequently asked questions
Are evacuation plans required by law in Maryland?
For many workplaces, yes. Maryland's OSHA-approved State Plan enforces requirements at least as strict as federal OSHA's 29 CFR 1910.38, which requires an Emergency Action Plan (including evacuation procedures) whenever another OSHA standard calls for one — and it must be in writing if you have more than 10 employees. Local fire codes may additionally require posted evacuation diagrams for specific occupancies such as hotels, schools and assembly buildings.
Which fire code applies to my building in Maryland?
Maryland's State Fire Prevention Code incorporates NFPA 1 and NFPA 101. The definitive answer always comes from your local Authority Having Jurisdiction (AHJ) — usually the city or county fire marshal — who can confirm the adopted edition and any local amendments.
How do I make an evacuation map for my building in Maryland?
Upload a PDF floorplan to a tool like EvacPlan Generator, mark all exits, draw primary and secondary routes from each area, add ISO 7010 safety symbols and an assembly point, then print, laminate and post the maps at exits, lift lobbies and corridors. Review the plan whenever the layout changes and at least annually.